Kiss Aristocrat 3000 Standard-1

Four Stage Standard RO Reverse Osmosis Water Filter Change Kit

Learn More

Learn More

10 Micron Premium Carbon Block Filter. Replaces KX Carbon Block Water Filter # 10-250-190-975 Compatible Replacement. The perfect carbon block for your standard reverse osmosis system. Extruded Carbon Block Water Filter. 9 3/4" long X 2 1/2" diameter OD X 1 1/4" diameter ID. 20 per case, sold individually. Order a case and save even more. GGN-10-2-BLOCK Learn More

Goes Green 5 Micron Premium Extruded Carbon Block Water Filter provides optimal VOC reduction and high chemical absorptive capacity. 9 3/4" long X 2 1/2" diameter OD X 1 1/4" diameter ID. 25 per case, sold individually. Order a case and save even more. Learn More

Dow Filmtec ® TW30-1812-50 TFC 50 GPD RO reverse osmosis membrane - standard size 1.75" X 11.75" Part # 80722 Learn More

Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Alos NSF certified. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate is perfect for your RO reverse osmosis drinking water system sanitizing.. Learn More

Pentek SW-1A # 150539 SW1 Slim Line Water Filter Housing Spanner Wrench. Compatible With Culligan, Ametek, US Filter, Plymouth, Kleen Plus, American Plumber, Bruner & Many Other Brands. SW-1 Water Filter Housing Wrench. Fits 4" Slim Line Housings. (Slim Line Housings Have A 3 1/2" diameter "O" Ring) Ametek # 150294. Only for use in loosening filter housings, never to tighten. Overtightening may cause damage to the O-rings and make re-opening VERY difficult. Hand tighten only. Fits most standard style RO systems. Replaces 150294. For really stubborn filter housings our technicians will use two wrenches together for maximum power where one wrench might break or not do the job. Place the handles of two wrenches pointing in opposite directions and it will apply force evenly. Our techs know the tricks. Learn More

Pentek # 151121 O-Ring For Slim Line Water Filter Housing Compatible With Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner & Many Other Brands. O-Ring For Slim Line Water Filter Housing. Buna-N FDA Grade. (Slim Line Housings Use A 3 1/2" diameter "O" Ring) Ametek # 151121 Same as Culligan OR-38 O-ring. Learn More

Dow Corning/ Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system? Learn More

Chrome Air Gap Faucet - Long Reach GGN-FAUCET-AG-P.  The perfect replacement faucet for under sink reverse osmosis systems.

Learn More

4 Gallon Reverse Osmosis Tank GGN-Tank-4 Pro 3.2

Learn More

Inversion Stand for Water Tank on  Reverse Osmosis Systems

Learn More

Air pressure gauge for reverse osmosis water accumulator tanks - Specially calibrated for reverse osmosis system tanks. Scale from 1 to 20 PSI. Large scale reading over small PSI range allows optimum accuracy. Just like car tires lose air pressure, so does the bladder of your reverse osmosis water accumulator tank. Improper tank air pressure will cause your system to operate improperly. This is a must for all reverse osmosis system owners. Learn More

TDS Water Meter - HM Digital DM1 - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm. Always know if your RO membrane is performing correctly! Learn More

TDS Meter - Tester. The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed Learn More

Chiller Daddy ® CHL-750XL Under Sink Water Chiller -  NEW TANK IS 25% LARGER than our previous chillers.  Output Cold Tank Volume : 3 liter (0.8 gallon) Exterior cabinet is made of RUST FREE 304 SS Stainless Steel. Cold Water Container is made of SUS304 Stainless Steel. Inlets and outlets are 1/4" stainless steel 304. Includes a pair of quick connectors for a simple hook up. Output of Cold Water : 1.34 Gallons Per Hour (5 Liters 5L/H (<10C) Continuous Cold Water Output(cc/hr) 5,400. This is a high output, heavy duty undersink drinking water chiller. Great for use with a Reverse Osmosis System or drinking water filter system.

Learn More

Inline Water Shut Off Valve - Great For Refrigerators And Ice Machines

Learn More

John Guest ® Poly Tubing 1/4" For Pure Drinking Filter Water Systems

Learn More