DuPure Pure Blue 3 Stage RO Reverse Osmosis System

DuPure Pure Blue 3 Stage RO Reverse Osmosis System

DuPure Pure Blue 3 Stage RO Reverse Osmosis System

Simply replace your Dupure or Raine Pure Blue -60 filter heads and start using the standard threaded Omnipure "Q" series replacement water filter cartridges at a lower cost than the -60 threaded filter cartridges. Only the filter heads will need replaced.  Choose either the valved or non-valved heads.  The valved head will turn off the water to each filter as the cartridge is removed. 

If you wish an even easier way to upgrade order either of the full replacement systems below which has the standad threaded Omnipure "Q" series heads and replacement filters included.  Simply disconnect the inlet and outlet tubes from the old system and connect them to the new system.  Done!

Since both systems use John Guest ® quick connectors it is very easy to install the replacement standard threaded head or replacement system. Keep your old DuPure or Raine faucet and feed valve.  See information on how easy it is to use John Guest quick connectors.

Choose any of the 3 RO Reverse Osmosis Membranes listed below based on your preference.  15, 36 or 50 GPD (gallons per day)

Once you convert to the standard "Q" series head you will be able to start sanitizing your RO system using the sanitizing cartridge listed below.  You will need 3 to fully sanitize your system.  They are reusable indefinately.

  1. Air Pressure Gauge for Reverse Osmosis Water Accumulator Tanks -1000
    Air pressure gauge for reverse osmosis water accumulator tanks
    Air pressure gauge for reverse osmosis water accumulator tanks - Specially calibrated for reverse osmosis system tanks. Scale from 1 to 20 PSI. Large scale reading over small PSI range allows optimum accuracy. Just like car tires lose air pressure, so does the bladder of your reverse osmosis water accumulator tank. Improper tank air pressure will cause your system to operate improperly. This is a must for all reverse osmosis system owners.
    Learn More
    $24.99 Special Price $17.99 As low as $12.99
  2. TDS Meter Inline Water Tester DM1 - HM Digital Dual Mode Reading
    TDS Meter Inline Water Tester DM1 - HM Digital Dual Mode Reading - Easily Installs Inline Very Simple To Use
    TDS Water Meter - HM Digital DM1 - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm. Always know if your RO membrane is performing correctly!
    Learn More
    $49.99 Special Price $39.99 As low as $19.99
  3. PuroTwist 3 Stage 50 GPD RO Reverse Osmosis TFC Membrane Quick Change Water Filtration Retro Fit System
    PuroTwist 3 Stage 50 GPD RO Reverse Osmosis TFC Membrane Quick Change Water Filtration Retro Fit System
    PuROTwist 3 Stage 50 GPD RO Reverse Osmosis TFC Membrane Quick Change Water Filtration Retro Fit System. PT3000T50-SS-RK Quick change head with 50 GPD membrane, Q5621 carbon block prefilter and Q5633 GAC post filter. No tank, faucet or installation kit. Uses John Guest quick connectors that are very easy to install. Works in place of the ® DuPure or ® Rayne "-60" Pure Blue - ® Omnipure -60 "Q" Series systems shown in the photo.
    Learn More
    $279.99 Special Price $199.99 As low as $179.99
  4. PuroTwist 4 Stage 50 GPD RO Reverse Osmosis TFC Membrane Quick Change Water Filtration Retro Fit System
    PuroTwist 4 Stage 50 GPD RO Reverse Osmosis TFC Membrane Quick Change Water Filtration Retro Fit System

    PuroTwist 4 Stage 50 GPD TFC Quick Change Water Filtration Retro Fit System.  Quick change head with 50 GPD membrane, Q5605 sediment prefilter, Q-5633 GAC carbon prefilter and post filter No tank, faucet or installation kit. Uses John Guest quick connectors that are very easy to install. Works in place of the ® DuPure or ® Raine "-60" Pure Blue - ® Omnipure -60 "Q" Series systems.  Converts stadard style cartridge RO systems to quick change filters for easier maintenance.

    Learn More
    $289.99 Special Price $219.99 As low as $199.99
  5. Pro Products Sani System RO & Water Filtration System Sanitizer
    Pro Products Sani System RO & Water Filtration System Sanitizer
    Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Alos NSF certified. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate is perfect for your RO reverse osmosis drinking water system sanitizing..
    Learn More
    $7.99 Special Price $4.99 As low as $2.99
  6. Molykote-From DOw Corning- 111 Compound-6 Gram O-ring Silicone Lubricant & Sealant-Dow-111-5-gram-1000
    Dow Corning - Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - Be sure to lube your O-rings to help prevent leaks.
    Dow Corning/ Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?
    Learn More
    $5.99 Special Price $3.99 As low as $1.79
  7. Chiller Daddy CHL-750XL Under Sink Water Chiller - 110 Volt
    Chiller Daddy CHL-750XL Under Sink Water Chiller - 110 Volt

    110 Volt Chiller Daddy ® CHL-750XL Under Sink Water Chiller -  NEW TANK IS 25% LARGER than our previous chillers.  Output Cold Tank Volume : 3 liter (0.8 gallon) Exterior cabinet is made of RUST FREE 304 SS Stainless Steel. Cold Water Container is made of SUS304 Stainless Steel. Inlets and outlets are 1/4" stainless steel 304. Includes a pair of quick connectors for a simple hook up. Output of Cold Water : 1.75 Gallons Per Hour (6.6 Liters 5L/H (<10C) Continuous Cold Water Output(cc/hr). This is a high output, heavy duty undersink drinking water chiller. Great for use with a Reverse Osmosis System or drinking water filter system.

    Learn More
    $499.99 Special Price $395.00 As low as $354.00
Easy TDS Membrane Performance Calculator
See If It is Time To Replace Your Membrane

Simply enter your Feed Water TDS and RO Water TDS into the boxes above and click "Submit". The percentage of TDS Rejection will be displayed. We normally recommend membrane replacement once you drop below 75%. This may vary in areas with high TDS in the feed water.

See our selection of TDS meters under Water Tests



* DuPure ® is the registered trademark of DuPure International, the manufacturer of DuPure ® brand water treatment equipment.  The replacement filters and membranes listed above are not manufactured or endorsed by DuPure.  Rather, these filters and membranes are manufactured by other companies.  While these filters and membranes are compatible for use in DuPure ® brand water treatment equipment, we make no representation as to whether using these filters and membranes is consistent with the warranty and specifications applicable to DuPure ® equipment.