Save With Quantity Discounts On Replacement Water Filters and Reverse Osmosis Membranes

PURO 15T

PURO 35T RO Reverse Osmosis system compatible premium replacement water filters, reverse osmosis membrane and parts.

 

IMPORTANT ADDITIONAL INFORMATION FOR Hellenbrand Millennium MRO-35

Use the Omnipure K-2333 in place of the S7206W inline post filter.  Many of these systems were installed with 3/8" tube connections, but measure yours to be sure you order the correct size.

How to Select Water Filter Connector Sizes .

Replacement Filters Are Listed Below. For Other Service Parts For Your RO System See Our Parts Department.


Service And Installation Guide - Water Filter Change Instructions, more.....

Set Descending Direction

9 Item(s)

  1. GE Osmonics ® Purtrex PX-5-978 Sediment Replacement Water Filter # 93023

    Regular Price: $8.99

    Special Price $5.99

    As low as: $3.99
    GE Osmonics ® Purtrex PX-5-978 5 Micron Sediment Water Pre Filter. True-graded density pure polypropylene depth replacement water filter. # 93023 9 7/8" long X 2 1/2" diameter. 40 per case, sold individually. Order a full case and save even more. Learn More
  2. Omnipure CL-10RO-T/33 GAC Inline Replacement Water Filter-1000

    Regular Price: $21.99

    Special Price $11.99

    As low as: $9.49
    Omnipure ® CL-10RO-T/33 inline GAC carbon water filter replacement cartridge. 1/4" (-B) or 3/8" (-C) FNPT (Female National Pipe Thread) connections. Replacement Jaco connectors and John Guest Speedfit connectors availble seperately for 1/4" or 3/8" tube. 25 per case, priced and sold individually. Order a case and save even more. Learn More
  3. Desal ® CTA-16 RO reverse osmosis membrane # 1201332 GE Osmonics Pentair

    Regular Price: $69.99

    Special Price $49.99

    As low as: $35.99
    Desal ® CTA-16 GE Pentair Osmonics - 16 GPD (gallons per day) CTA reverse osmosis membrane - standard size. # 1201332 - 1224433. Compatible with Dow Filmtec, WaterFiltersOnline.com and CSM RO Reverse Osmosis membranes. Learn More
  4. Replacement 3 Gallon Reverse Osmosis RO Pure Water Accumulator Bladder Tank

    Regular Price: $69.99

    Special Price $49.99

    As low as: $28.99
    Replacement 3 Gallon Reverse Osmosis Pure Water Accumulator Tank. Valve Optional. Rust, Dent & Chip Free Design. 14 1/4" tall x 10" diameter. NSF polypropolene. #ROPRO Connection Size: 1/4" MNPT - On / Off Valve Optional. Learn More
  5. Pro Products Sani System Water Filtration System Sanitizer

    Regular Price: $7.99

    Special Price $4.99

    As low as: $2.49
    Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate. Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Sani-System is now NSF certified! Learn More
  6. TDS Water Meter Dual Mode Readings - DM2 HM Digital Professional Grade

    Regular Price: $69.99

    Special Price $49.99

    As low as: $29.99
    TDS Meter Dual Mode Readings - Professional Grade - Easily Installs Inline - Very Simple To Use. Measure the tap water coming in vs. the purified water going out of your system at any time. Use the meter to determine when the filters need to be changed. Highly efficient and accurate due to its advanced microprocessor technology. Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. Dual Range - Measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, indicated by a blinking 'x10' image. Factory calibrated meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with 1/4 inch John Guest Quick-Connect T-fittings as shown. Also available with 3/8" fittings. Installs quickly and easily. Differences from the DM-1: Designed for commercial/industrial applications. Stronger, water-resistant casing. Improved design, including an extra large, easy-to-read LCD display. Longer, waterproof, shielded cables. Variable mounting bracket. SPECIFICATIONS: Range: 0-9990 ppm Accuracy: ±2% Cable Length: 46" (including sensor) Power source: 2 AAA batteries (included) Battery life: over 1000 hours of continuous use Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.) Weight: 201.3 g (7.1 oz.) HM Digital. Simply cut the line out from the RO membrane housing and install the inline probe between the membrane housing and the shutoff valve, when possible. The closer to the membrane housing the better. Insert the ends of the tube into the John Guest quick connectors on the TDS meter probe. Then cut the inlet feed water line to the system and install the other T/probe. Learn More
  7. TDS Meter Inline Water Tester DM1 - HM Digital Dual Mode Reading

    Regular Price: $49.99

    Special Price $39.99

    As low as: $19.99
    TDS Water Meter - HM Digital DM1 - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. Simply cut the line out from the RO membrane housing and install the inline probe between the membrane housing and the shutoff valve, when possible. The closer to the membrane housing the better. Insert the ends of the tube into the John Guest quick connectors on the TDS meter probe. Then cut the inlet feed water line to the system and install the other T/probe. FEATURES Displays TDS levels of the feed water and product water with in & out electrode probes. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.) Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Comes equipped with John Guest Quick-Connect T-fittings as shown. Installs quickly and easily. SPECIFICATIONS Range: 0-9990 ppm Accuracy: ±2% Cable Length: 24.5" (including sensor) Power source: 2 x 1.5V button cell batteries (included) Battery life: over 1000 hours of continuous use Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.) Weight: 79.4 g (2.8 oz.) Always know if your RO membrane is performing correctly! Learn More
  8. TDS Meter - Test For Total Dissolved Solids In Water - Reverse Osmosis Membrane Tester - TDS Meter

    Regular Price: $49.99

    Special Price $37.99

    As low as: $17.99
    TDS Meter - Tester. The Only Way To Know If Your Reverse Osmosis RO Membrane Is Performing Correctly - Tests for TDS - Total Dissolved Solids. A Must For All RO System Owners. Compare Incoming Feed Water To Treated Water - Replace Membrane If Less Than 80% of TDS Is Being Removed - Total dissolved solids (TDS) are the total weight of all solids (minerals, salts or metals) that are dissolved in a given volume of water expressed in milligrams per liter (mg/L), or in parts per million (PPM). The lower the TDS level in the water, the more efficiently your body's cells actually get hydrated by the water that you drink. The higher the TDS levels in the water, the greater the probability of harmful contaminants that can pose health risks or hinder the absorption of water molecules on the cellular level. Learn More
  9. Air Pressure Gauge for Reverse Osmosis Water Accumulator Tanks -1000

    Regular Price: $24.99

    Special Price $17.99

    As low as: $12.99
    Air pressure gauge for reverse osmosis water accumulator tanks - Specially calibrated for reverse osmosis system tanks. Scale from 1 to 20 PSI. Large scale reading over small PSI range allows optimum accuracy. Just like car tires lose air pressure, so does the bladder of your reverse osmosis water accumulator tank. Improper tank air pressure will cause your system to operate improperly. This is a must for all reverse osmosis system owners. Learn More

Set Descending Direction

9 Item(s)